oil coolers
About our Products:
Applications
Application Uses and Selection of Coolers
Inventories
Flanges, Compensators and Butterfly Valves
Plate-Heat Exchangers
Assembled Oil / Air Coolers
Components for Oil / Air Coolers
Documentation:
ISO Certification

Compensators

ISO 9001:2000

Oil Coolers, Air Coolers, Plate Coolers, Oil to Air Heat Exchangers and Oil to Water Heat Exchangers, Butterfly Valves, Butterfly Flanges, Hydraulic Couplings.
For Mobile and Industrial Applications

View Full Product Line

Compensators

Compensators are elastic connectors of pipes in suction lines. They are used to compensate for tensile/compressive stress caused by temperature differences, vibrations, offsets and small angles in pipelines. The values in the catalogue are maximum values.

Compensators with SAE-connectors are available in sizes NG25 to NG125, those with DIN-connectors from NG 40 to NG80 and NG100, those with pipe thread connectors from NG40 to NG50. A combination of above-mentioned compensators is possible.

Area of use: • Construction machinery
• Stationary and mobile hydraulic aggregates.
• Elastic connection between pipelines
• Pipelines with pressure of max. 1,5 bar (21psi)

Oil Air Coolers | Butterfly Valves | Assembled Oil Coolers / Air Coolers
SAE-and CETOP Flanges | Plate-Heat Exchangers | Contact Us

ASA Hydraulik of America
160 Meister Ave #20A
Branchburg, NJ  08876
(800) 473-9400 • Fax 908-541-1550

 copyright © 2003 ASA Hydraulik All rights reserved